PRODUCTS
Engineering Matters providing variety of systems and applications to a wide range of industries such as Chemical Process, Petroleum, Oil and Gas, Waste Management, Utility and Water Treatment, Sea and Land Transports, Food Processing and Pharmaceutical industries.
We are working closely with our reputable principals and manufacturers, our product range includes:
- Spray Painting Pumps (Electrical / Pneumatic)
- Diaphragm Pumps (Electrical / Pneumatic) :-
for Materials: Powder, Solid, Oil, Chemical and other Fluids. - Sandblasting Equipment
- Auto-
Lubrication System :- for Machineries, Construction Vehicles and others. - Engine Oil/Fuel Filtration :-
for Machineries and Equipments and Marine & Land Transports such as Dump Truck, Buses, Ships, Military Vehicles and even Taxis.
ENGINEERING INTEGRATED SOLUTIONS
PRODUCTS
A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or Teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-
Diaphragm pump characteristics:
- have good suction lift characteristics, some are low pressure pumps with low flow rates; others are capable of higher flow rates, dependent on the effective working diameter of the diaphragm and its stroke length. They can handle sludge and slurries with a relatively high amount of grit and solid content.
- pump design separates pump fluids from potentially sensitive internal pump parts.
- internal pump parts often within oil, suspended and isolated, to promote pump longevity.
- suitable for abrasive, corrosive solutions.
- have good dry running characteristics.
- can be up to 97% efficient.
- have good self priming capabilities.
- can pump corrosive, abrasive, toxic, and flammable liquids.
DIAPHRAGM PUMP
PRODUCTS
An automatic lubrication system (ALS), often referred to as a centralized lubrication system, is a system that delivers controlled amounts of lubricant to multiple locations on a machine while the machine is operating. Even though these systems are usually fully automated, a system that requires a manual pump or button activation is still identified as a centralized lubrication system. The system can be classified into two different categories that can share a lot of the same components.
Auto lube systems have many advantages over traditional methods of manual lubrication:
- All critical components are lubricated, regardless of location or ease of access.
- Lubrication occurs while the machinery is in operation causing the lubricant to be equally distributed within the bearing and increasing the machine’s availability.
- Proper lubrication of critical components ensures safe operation of the machinery.
- Less wear on the components means extended component life, fewer breakdowns, reduced downtime, reduced replacement costs and maintenance costs.
- Measured lubrication amounts means no wasted lubricant.
- Safety -
no climbing around machinery or inaccessible areas (gases, exhaust, confined spaces, etc.).
- Increased overall productivity resulting from increase in machine availability and reduction in downtime due to breakdowns or general maintenance.
- in this system lubrication the engine parts are lubricated under pressure feed.
AUTOMATIC LUBRICATION
PRODUCTS
SANDBLASTING
Abrasive blasting, more commonly known as sandblasting, is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface or remove surface contaminants. A pressurised fluid, typically compressed air, or a centrifugal wheel is used to propel the blasting material (often called the media).
There are several variants of the process, using various media; some are highly abrasive, whereas others are milder. The most abrasive are shot blasting (with metal shot) and sandblasting (with sand). Moderately abrasive variants include glass bead blasting (with glass beads) and plastic media blasting with ground-
SPRAY PAINTING
Spray painting is a painting technique where a device sprays a coating (paint, ink, varnish, etc.) through the air onto a surface. The most common types employ compressed gas—usually air—to atomise and direct the paint particles. Spray guns evolved from airbrushes, and the two are usually distinguished by their size and the size of the spray pattern they produce. Airbrushes are hand-
SANDBLASTING AND SPRAY PAINTING
PRODUCTS
Oil filtration is designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil.
Oil filters are used in many different types of hydraulic machinery. A chief use of the oil filter is in internal-
Filter placement in an oil system:
Deciding how clean the oil needs to be is important as cost increases rapidly with cleanliness. Having determined the optimum target cleanliness level for a contamination control programme, many engineers are then challenged by the process of optimising the location of the filter.
To ensure effective solid particle ingression balance, the engineer must consider various elements such as whether the filter will be for protection or for contamination control, ease of access for maintenance, and the performance of the unit being considered to meet the challenges of the target set.
OIL & FUEL FILTRATION
PRODUCTS
Wde selection of monitoring, analysis, testing and measuring instruments used to measure various parameters in the physical, electrical and chemical spectra.
There are more than 800 different kinds of desktop and handheld measuring and test equipment in the industries and no matter what kind of task, you’re sure to find the right tool for your application.
Exact measurement is an absolute must to guarantee quality work. Thus, precise and reliable measuring instruments are essential tools of nearly every trade.
Companies big and small need accurate, affordable measuring instruments for use in product research and development (R&D), quality control, condition monitoring, workplace safety and more. From accelerometer devices used to measure vibrations and oscillations in machinery to wood moisture meter products designed to determine the humidity of lumber, PCE Instruments’ breadth of measuring instruments and test equipment offerings covers a full range of commercial and industrial applications.
Everyday consumers also need accurate, affordable measuring instruments for evaluating home energy efficiency, monitoring weather conditions, checking swimming pool pH levels and more. For these types of applications, we offers a number of easy-
MEASURING INSTRUMENTS
PRODUCTS
specializing in the design and fabrication of marine and offshore windows, doors, hatches, ladders and other types of hull outfittings, accommodation system and pre-
We are providing our support to local and overseas shipyards and owners, from new built, conversion and repair vessels and rigs.
We customize and fabricate according to vessels and rigs requirements with certification (ABS, BV, DNV, NK & Others) and testing and providing commissioning services.
Our products range from Marine Windows to Watertight Doors, Interior Accommodation Systems including Toilet Module. Accessories such as Window Wipers, Sun Screen and Heavy Equipment such as Winches and anchor & chain.
MARINE & OFFSHORE
